Tell a friend Print

652857 You install the product like this...
1.	2.
3.	4.
Attention! Read all instructions before attaching the ProClip.  This ProClip consists of two parts.  Part 1. Attaching piece.  Part 2. ProClip face plate.    1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the control panel and the dashboard    2. Press on Part 1, away from the steering wheel, so the edge hooks under/behind the panel.    3. Press a Philips screwdriver through the predrilled holes in part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 on Part 1 so the holes match up. Screw Part 2 onto Part 1 with the enclosed screws.    4. The ProClip is in place.