Tell a friend Print

840653 You install the product like this...
1.	2.
3.	4.
Please read all instructions and look at the pictures before attaching the holder.    1. Installation of cable: Place the holder with the backside upwards. Press on the button on the connector, in the same time place the connector into the lower part of the holder. The mark pointing downwards, so you can not see it when placing the connector into the holder.    2. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the enclosed screws. The cable is in place.    3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.     4. The holder in place, with cable in place.