1.

3.

Please read all of the instructions and look at the pictures before attaching the mount.  
 
1. Place the original mount with the back side upwards, as shown on picture. Remove the speaker cover by twisting and lifting it firmly. Be careful not to remove the speaker and gasket. Remove the suctions mount part.  
 
2. Place the mount with the tilt swivel around the speaker. Make sure that the gasket and the speaker is properly in place.  
 
3. Put the speaker cover back into place, carefully so the gasket does not move. Press the speaker cover firmly into place.  
 
4. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate so the tilt swivel fits. Screw the mount onto the attaching plate. The mount is in place.