Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.
3. The device can be placed in the holder both with and without the original mount on the back. If the original mount is used, the hinge (larger part) should be pointing upwards.
4. The holder is in place.