Holder with 3-in-1 Adapter
3 cm adapter cable.
When you put the device in the holder, it is automatically connected to:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
The holder is designed with a tilt swivel, this means that you can adjust your device in order to avoid reflections in the display. You can also easily switch between an upright or a horizontal position, just by turning the holder. The PDA holders have a perfect fit and holds the PDA firmly in place. When you put the device in the holder the device internal speaker will be shut down (otherwise the headset and 3,5 mm plug will not work).
Attach the holder onto a ProClip Mounting Platform in your vehicle and you will have your PDA in easy reach -safe and convenient.
Item no 519163
EAN: 7320285191631
Item no 519163 fits:
- HTC Tilt 2 (For all countries)
1.
2.
3.
4.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel.
3. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
The message has been sent
Could not send the message
