Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the enclosed gap opener into the gap between the panel around the airvents and the panel around the radio and controls, to widen the gap. Peel off the cover of adhesive tape on the ProClip. Place the thin edge of the top of the ProClip into the widened gap.
2. Press in on the top part of the ProClip as you rotate the ProClip downward until the bottom of the ProClip touches the lower part of the panel.
3. Move the gap opener into the gap on the lower part of the panel. Push the lower part of the ProClip forward until you hear/feel it clip into place in the gap next to the gap opener. Pull out the gap opener.
4. The ProClip is in place.