Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of adhesive tape on the ProClip. Press the angled edge on the upper part of the ProClip into the seem/gap between the air vent and the surrounding panel frame.
2. Start with the left corner of the ProClip and then continue to the right until the angled edge is all the way into the gap.
3. Place your index finger onto the bottom of the ProClip and push so it flexes upward. Push the ProClip a tiny bit forward and let go of the pressure so the thin end goes into the gap between the air vent and the surrounding panel frame.
4. The ProClip is in place.