213019

Tilt swivel

Off center face plate with predrilled AMPS holes. Adjustable 15°.

For a higher/lower position or more to the left/right. With predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction. 42x50x20 mm.

Item no 213019

EAN: 7320282130190



INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Attention! Please read all of the instructions and look at the pictures before attaching the Tilt Swivel.  
 
1. Unscrew the center screw and remove the faceplate  
 
2. Place the base plate of the Tilt Swivel onto the ProClip dash mount (or any other mount or flat surface). Screw the plate to the ProClip dash mount using the enclosed screws. (As long as you are screwing the plate to the ProClip you don't have to remove the cover of the adhesive tape)  
 
3. Place the faceplate over the base plate and screw the pieces together. Adjust the faceplate to desired position and tighten the screw further.  
 
4. The Tilt Swivel is in place. You can attach any holder or car kit to the Tilt Swivel.