516060

Holder with Pass-Through Connector

Passive holder with tilt swivel.

The choice for you who often connect a miniUSB-cable to our GPS device, and want to have it neatly and securely mounted in the car. With your GPS in a holder, you will always have your GPS within easy sight and reach!  
 
The holder is equipped with a pass-through connector, so all miniUSB-cables that can be used with the GPS device can also be used with the holder (e.g. a charging or TMC cable). When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. Can not be used with Navigons Live-module and Digital-TV-module.  
 
The holder is placed on the dashboard, providing you with an unobstructed view. You can easily take your GPS with you when leaving the car. The holder is equipped with a tilt swivel, this means it is easy to adjust the angle as needed. Attach onto ProClip Mounting Platform.

Item no 516060

EAN: 7320285160606



Item no 516060 fits:

  • Navigon 8410 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder.  
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
 
2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.  
 
3. All cables that fit the device, can also be attached to the holder.  
 
4. The holder is in place.