Active holder with cig-plug.
With tilt swivel. Fits devices with standard and extended battery.
The holder is equipped with a tilt swivel, this means that you can adjust the angle of your device for easier viewing and avoiding light reflection. Attach onto the ProClip Mounting Platform.
Item no 526208
EAN: 7320285262089
Item no 526208 fits:
- Motorola ES400 (For all countries)
1.
2.
3.
4.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
3. To place the device in the holder: Place the upper part of the device in the holder, then flip/press the lower part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the lower part of the device out from the holder and then lift the device up and out from the holder.
4. The holder is in place.
Attach your holder onto a ProClip!
You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here:
