Log in...
Tell a friend >
Motorola MC55/MC65 - Vehicle Charging Holder for Fixed Installation

Features & Benefits

  • Motorola Compatible Product
  • Always keep your battery fully charged
  • Works in 12 and 24 volt vehicles
  • Access to all ports
  • One-handed insertion/removal of device
  • Charging cable attached to holder
  • Dock type connection/li>
  • Made of high grade ABS plastic
  • Manufactured in Sweden by Brodit AB
  • AMPS hole pattern for easy attachment to wall, pedestal or dashboard vehicle mount

Protect your investment in Mobile Computing with Brodit in-vehicle charging holders for the MC55/MC65-series! The charging holders are device-specific and designed for in-vehicle use. The slender lightweight profile of the holder allows the user to conveniently mount it within the vehicle optimizing accessibility and operation. This increases user efficiency and reduces the potential for damage to the device. The charging holder provides a safe and secure fit when docking and maintains a reliable connection. Constructed to high- quality standards, the design can withstand the most severe road conditions and temperature extremes. The charging holder reduces concern of the device bouncing around the vehicle or running out of battery before the day is done!

This is a Motorola Compatible Product

We are proud to announce we have become a Motorola Solutions Independent Hardware Vendor (IHV). The Motorola Solutions IHV Program is an effective vehicle for developing and marketing fully integrated third-party products and components that enhance and extend enterprise mobility solutions to meet application specific needs. These accessories have been developed by IHV partners with Motorola support in an effort to ensure that Motorola Solutions and its partners continue to develop the most advanced Mobile Computing solutions available.

We have achieved Motorola Solutions Compatible Status. Motorola Solutions Compatible accessories are thoroughly tested for interface requirement compliance and functionality to ensure they do not hinder the performance of the host terminal.

About the charging holder

This holder works in 12 volt and 24 volt vehicles and comes with a straight cable for hard wire install directly connected to a 12/24 V permanent power source in the vehicle. The design allows for one-handed easy insertion and removal and provides a secure attachment when placed in the holder. The holder can be used in commercial vehicles, personal vehicles, public agency vehicles, emergency vehicles, utility vehicles, etc., and mounts to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.

A fully charged device will prevent a breakdown in data, GPS and/or voice communication due to loss of power. It has the original Motorola connector built into the holder creating a dock type connection that secures the device in the holder. The design allows for one-handed easy insertion and removal and provides a secure attachment when placed in the holder.

The ProClip charging holder does not block any ports or buttons on the device and it can be easily viewed and operated by the user when attached to the vehicle dashboard. This can be done with a ProClip vehicle mount or any other in vehicle mounting platform/pedestal. The innovative design of the ProClip dashboard mount allows the driver to secure the charging holder on the dashboard or center console for a close reach and heads up display, perfect for GPS and hands free communication. In other situations where a dashboard mount or pedestal cannot be used the ProClip charging holder can be attached to any flat surface or wall within the vehicle.

Product specifications

Dimensions 172 x 83 x 50 mm
Weight 0.28 kg / 0.61 lbs
Input Voltage 10-30 V
Output Voltage 5.4 VDC
Output Current 3 A
Indicator/LED LED Amber to Green indicator
Operating Temperature -40 to +50 Degrees Celsius
EMI/RFI CE, E, FCC Part 15, Class B
RoHS Compliant Yes
Electrical Test ISO 7637 and SAE J1455
Life Cycle Test Functional after 55,000 inserts and removals
Vibration Test Sine on Random 0.04g2/Hz, (20Hz to 2KHz) 4g sine tones 1 hour duration per axis for 3 axis tested, per MIL STD 810F, Method 514, Procedure I. Reference MIL STD 810F

249004 - Product Specifications Sheet


Motorola makes no express or implied representation or warranty with respect to: (i) any of the Products referenced herein; (ii) the information provided herein (including without limitation the key findings and test results regarding the Products and the functionality or interoperability thereof) (“Information”) or any solution, combination or system that may be created with the use thereof. The user of the Products and the Information is using them at its own risk. Motorola disclaims all other express and implied warranties including, without limitation, the implied warranties of non-infringement, merchantability and fitness for a particular purpose. The Program is offered “as is” with all faults and does not constitute professional, technical, legal or other advice to the user.