Log in...

Mounting bracket

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

  • Item no: 213492 - Center mount, Extra strength mounting platform. NOT for models with the high built in navigation system.
  • EAN: 7320282134921

Item no 213492 fits:

  • Ford Excursion 11-16 (For USA)
  • Ford F-Series 250 11-16 (For USA)
  • Ford F-Series 350/450 11-16 (For USA)
  • Ford F-Series 550/650/750 11-16 (For USA)
  • Ford Raptor 09-16 (For USA)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the ProClip.  
   
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape cover on the ProClip. Hook the angled edge on the upper part of the ProClip into the seam in the defrost vent opening.  
   
2. While pressing down on the middle section of the ProClip, place your fingers behind the face plate and flex the lower angled edge over the dash overhang.  
   
3. Press forward on the face plate to make sure the ProClip attaches securely.  
   
This is a very tightly fitting mount and will take some pressure to attach the ProClip onto the dash.  
   
4. The ProClip is in place.

Related Products