Log in...

Mounting Accessories

Tilt swivel mount.

The choice for you who prefer to have your GPS device within easy sight and reach attached onto the dashboard instead of in the windshield. The product consists of a tilt swivel mount and a MultiMoveClip that replaces the original mount.

 

You can easily take you device with you when leaving the car. A charging cable can be connected to the device when it is in place in the mount. You can adjust the angle of the device in order to avoid light reflection. Attach the mount onto a ProClip Mounting Platform. 

  • Item no: 215567
  • EAN: 7320282155674

Item no 215567 fits:

  • TomTom GO 40 (For all countries)
  • TomTom GO 400 (For all countries)
  • TomTom GO 50 (For all countries)
  • TomTom GO 51 (For all countries)
  • TomTom GO 60 (For all countries)
  • TomTom GO 61 (For all countries)
  • TomTom GO LIVE 800 Series (For all countries)
  • TomTom GO LIVE 820 (For all countries)
  • TomTom GO LIVE 825 (For all countries)
  • TomTom Go Basic (For all countries)
  • TomTom Start 20 (For all countries)
  • TomTom Start 25 (For all countries)
  • TomTom Start 40 (For all countries)
  • TomTom Start 50 (For all countries)
  • TomTom Start 52 (For all countries)
  • TomTom Start 60 (For all countries)
  • TomTom Start 62 (For all countries)
  • TomTom Via 100 (For all countries)
  • TomTom Via 110 (For all countries)
  • TomTom Via 120 (For all countries)
  • TomTom Via 120 Live (For all countries)
  • TomTom Via 125 (For all countries)
  • TomTom Via 125 Live (For all countries)
  • TomTom Via 130 (For all countries)
  • TomTom Via 135 (For all countries)
  • TomTom Via 52 (For all countries)
  • TomTom Via 62 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the mount.  
   
1. Remove the original assembly/arm that includes the suction cup: Push the suction cup assembly/arm rightwards into a horizontal position. Lift/bend the suction cup assembly/arm so the ball joint eases out of the cup in which it sits.  
   
2. Attach the mount onto your device: Hold the mount horizontally and hook the ball into the hole on the back of your device. Turn the mount into vertical position so it locks/hooks into place in the device. Place the MultiMoveClip onto the desired position and screw into place with the enclosed screws.  
   
3. Put the device in place: Slide the device straight downward into the MultiMoveClip so you hear/feel it snaps into place. Remove the mount: Press the latch on the MultiMoveClip (accessed through the hole of the mount) and press/lift the mount straight upward and out of the MultiMoveClip.  
   
4. The mount is in place.