Log in...

Mounting plate

Extension plate, for devices with rugged frame.

With an extension plate mounted onto your Zebra ET50/55 you can attach another smaller device and easily carry it with you. The extension plate is mounted onto the back of your device while carried in a rugged frame. The plate has pre-drilled AMPS-holes in order to with Brodit holders with tilt swivel. The extension plate can be placed on either right or left side on the device.


Dimensions: 120 x 86 x 9 mm (W x H  x D mm).

Weight: 62 g

  • Item no: 215916
  • EAN: 7320282159160

Item no 215916 fits:

  • Zebra ET50 10.1 (For all countries)
  • Zebra ET50 8.3 (For all countries)
  • Zebra ET51 10.1 (For all countries)
  • Zebra ET51 8.3 (For all countries)
  • Zebra ET55 10.1 (For all countries)
  • Zebra ET55 8.3 (For all countries)
  • Zebra ET56 10.1 (For all countries)
  • Zebra ET56 8.3 (For all countries)





Read all of the instructions and look at the pictures before installing.  
Please note: The extension plate can be placed on either side of the rugged frame. Does only fit devices with the rugged frame with holes on the back.  
1. Turn the device back side up in order to locate the holes on the back side of the rugged frame.  
2. Place the extension plate over the holes.  
3. Attach the extension plate using the enclosed screws.  
4. The extension plate is in place.