Log in...

Passive holder with tilt swivel

Do you prefer to have your Garmin device firmly in place within easy reach while driving, instead of trying to reach for it in a suction cup mount on the windshield? Brodit holders provide a firm installation of your device within easy reach and sight in your car. Neat, discreet and convenient. The holder is custom made with a perfect, firm fit. It is to be used with the original magnetic mount that is included when you buy the device.

 

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade ABS/Acetal plastic. Color: Black. Made in Sweden. Attach onto ProClip Mounting Platform or a Pedestal Mount.

  • Item no: 216000
  • EAN: 7320282160005

  • Width: 70 mm
  • Height: 130 mm
  • Depth: 58 mm
  • Volume: 528 cm³
  • Weight: 225 g

Item no 216000 fits:

  • Garmin Fleet 770 (For all countries)
  • Garmin Fleet 780 (For all countries)
  • Garmin Fleet 790 (For all countries)
  • Garmin dezl 780 LMT-D (For all countries)
  • Garmin dezlCam 785 LMT-D (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and  look at the pictures before attaching the holder.  
   
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted  
   
2. Place the original mount onto the ball mount in the holder and press it firmly forward so it snaps into place. Place the device in the holder.  
   
3. Remove the device from the holder. To remove the original mount from the holder: Press on the back of the original mount through the hole in the holder so it is released from the ball mount.  
   
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: