Log in...

Mount

With sliding power block and MultiMoveClip. 12/24V

This mount offers an easy and secure way to mount your printer. It keeps your printer's battery fully charged at all times, and you will always have your printer within easy sight and reach! Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. With quick release MultiMoveClip, easy to move your printer between locations. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.

 

With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.

 

  • Item no: 216003
  • EAN: 7320282160036



Product sheets: 236152.pdf

Item no 216003 fits:

  • Informs LK-P12 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the product.  
   
1. Attach the mount onto the device: Place the sliding charging block onto the mount and screw it into place with the enclosed screws. Press the angled edge of the mount into the gap in the device. Place the enclosed screw in the hole and screw it into place with the enclosed tool.  
   
2. Mount the MultiMoveClip with sliding power block: Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the mount is firmly in place, but still can be adjusted.  
   
3. Put the device into place: Hold the device on the right side of the mount. Slide it leftwards onto the mount so it snaps into place.  
Remove the device: Press forward on the release lever and slide the device righwards away from the mount.  
   
4. The product is in place.