Log in...

Active holder with cig-plug

2A charging. 12/24V. With Easy-switching system.

The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. With straight cable.

 

Easy-switching system:

The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.

 

Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount.

Charging specification:

Charging specifications:

Input voltage: DC/10-30V

Charging voltage: DC/4.75-5.3V

Output current(Typ): 2.0A

Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection

LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)

Operating temperature: 0°C ~ +40°C

Storage temperature: -20°C ~ +80°C

RoHS compliant: ROHS

  • Item no: 216089
  • EAN: 7320282160890

Item no 216089 fits:

  • Zebra MC3300 (For all countries)
INSTALLATION INSTRUCTIONS:

Please read all of the instructions and look at the pictures before attaching the mount.  
   
1. Attach the mount: Place the mount into the desired position.  
   
2. Attach it with the enclosed screws.  
   
3, 4. The mount is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: