Log in...

Mount

With MultiMoveClip with sliding power block. Fits devices with both standard and Eliminator battery.

This mount offers an easy and secure way to mount your printer. It keeps your printer's battery fully charged at all times, and you will always have your printer within easy sight and reach! Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. With quick release MultiMoveClip, easy to move your printer between locations. Attach onto a Pedestal Mount or a flat surface.

 

A recommended accessory is Vibration dampener.

 

With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.

  • Item no: 216145
  • EAN: 7320282161453

  • Width: 170 mm
  • Height: 143 mm
  • Depth: 229 mm
  • Volume: 5567 cm³
  • Weight: 360 g

Item no 216145 fits:

  • Zebra ZQ630 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the product.
 
1. Location of the screws before mounting, LONG screws 16mm, SHORT screws 9mm. Place the mount onto the device so the holes match. Screw the two enclosed LONG screws in place in the holes shown in the picture. Screw the two enclosed SHORT screws in place in the holes shown in the picture.
 
2. Put the device into place: Hold the device on the right side of the mount. Slide it leftwards onto the mount so it snaps into place. Mount the cable.
 
3. Remove the device: Press forward on the release lever and slide the device righwards away from the mount.
 
4. The product is in place.