Log in...

Table Stand

5-way desktop charging dock. With power cable, worldwide adapters included. Fits for devices with Tough Sleeve and Heavy Duty Tough Sleeve.

Brodit has developed a desktop charging dock for simultanious charging of four tablets. The charging dock is used by haulage contractors, warehouses, schools and offices, as well as within health care, police and civil protection; everywhere where tablets are used in daily operation. The desktop charging dock can handle up to fore devices simultaneously, it takes up minimum space and if using many tablets, several charging docks can be neatly placed next to each other. Fits for devices with Tough Sleeve and Heavy Duty Tough Sleeve.

 

’Grab-and-go’:  You can easily grab your tablet on the go. The dock charges the device via the connector on the long side. Just place the device in the charging dock and the charging starts instantly. Length of cable: 112 cm.

 

Charging specification:

- Output Connector Type: USB, 5 ports
- Output Voltage: 5V
- Output Current: USB 5V 2.4A (Total output current 8A single port maximum output 2.4A)
- Output Voltage Ripple: 200mV pk-pk at Max Load
- Input Voltage Range: AC 110V~240V 50/60HZ
- Input Current: 0.8A (30A at peak)
- Input Current with No device attached: 0.005A
- DC-DC Conversion Efficiency: Over 85% Typical
- Rated Power: 40W
- Dimensions: 89x64x30 mm (WxLxH).
- Weight: 129g.

- Made of black Acetal plastic.

  • Item no: 216157
  • EAN: 7320282161576

  • Width: 265 mm
  • Height: 204 mm
  • Depth: 335 mm
  • Volume: 18110 cm³
  • Weight: 2500 g

INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the mount.

1. To mount the attachment: place the attachments in the pre-drilled grooves and then fasten them with the enclosed screws.

2. Connect each USB cable to the USB power source.

3. Mount the table stand on the wall: Screw on the table stand with the enclosed screws.

4. The table stand assembled, placed on a table.