Log in...

Passive holder with tilt swivel

Are you using a two-way radio every day in your work? Then a Brodit passiv holder will make your days much easier! By keeping the device in an passiv holder, you will always have it within easy sight and reach while driving between jobs. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. A charging cable can be connected to the device Attach onto a ProClip Mounting Platform.


Dimensions: 61 x 86 x 80 mm (W x H x D mm)

  • Item no: 511952
  • EAN: 7320285119529

Item no 511952 fits:

  • Tetra THR9 (For all countries)





Please read all of the instructions and  look at the pictures before attaching the holder.  
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.  
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: