Log in...

Active holder with cig-plug

With tilt swivel. Padded.

Keep your device in an active holder while on the road, and you will always have a freshly charged battery! With cigarette lighter cable, 12/24 Volt.

 

The holder is equipped with a tilt swivel, this means that you can adjust the angle of your device for easier viewing and avoiding light reflection. Attach onto the ProClip Mounting Platform.

  • Item no: 512176
  • EAN: 7320285121768

Item no 512176 fits:

  • HTC EVO 4G (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder.  
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel.  
 
3. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.  
 
4. The holder is in place.

Related Products

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: