Log in...

Active holder with cig-plug

12/24V

This holder offers an easy and secure way to mount your printer. It keeps your printer's battery fully charged at all times, and you will always have your printer within easy sight and reach! Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made holder with a perfect, firm fit. Extra robust design, very strong holder. With cig-plug cable 12/24V. It is easy to slide the printer in place in the holder so it connects to the charging, and to take it out of the holder when you need to take it with you. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.

 

With AMPS-holes. Made of high grade Acetal plastic. Color: black. Made in Sweden.

Charging specification:

Charging Specifications:

Battery Chemistry: Li-ion or Li-Poly batteries

Input Voltage: 11-30 V

Charging Voltage: 8.4 V

Timer for Max. Charging Time: Automatic, stops at 8.4 V

Max. Charging Time: 2-3 hours depending on battery capacity

Rapid Charge: 1 A +/- 5%

Trickle Charge: 0 to 50 mA  

LED Charging Indicator: LED Red to Green indicator

Temperature Control: Controlled by battery  

RoHS Compliant: Yes

Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.

Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

 

Cable length (+plug 9 cm): 185 cm.

  • Item no: 530870
  • EAN: 7320285308701

  • Width: 91 mm
  • Height: 138 mm
  • Depth: 42 mm
  • Volume: 527 cm³
  • Weight: 214 g



Product sheets: 236152.pdf

Item no 530870 fits:

  • Bixolon SPP-R200II (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and  look at the pictures before attaching the holder.  
   
1. Place the holder onto the desired position. Screw the holder into place with the enclosed screws.  
   
2. To place the device in the holder: Place the top part of the device into the holder. Press the bottom of the device forward into place in the holder.  
   
3. To remove the device from the holder: Pull the lower part of the device toward you. When the device is set free, lift it out of the holder.  
   
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: