Log in...

Passive holder with tilt swivel

With your Printer in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the Printer in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the Printer when it is in the holder. Attach onto a Pedestal Mount.

  • Item no: 711113
  • EAN: 7320287111132

  • Width: 85 mm
  • Height: 84 mm
  • Depth: 68 mm
  • Volume: 486 cm³
  • Weight: 92 g

Item no 711113 fits:

  • myPOS a920 3G (For all countries)
  • myPOS a920 4G (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder.  
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
 
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.  
 
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: