Log in...

Active holder with cig-plug

With tilt swivel. 3 A charger.

The active holder charges your battery when it is in the holder. The charging device connects to the device automatically when you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Charging specification:

Cable length (+plug 9 cm): 38 cm, stretched:130 cm.

  • Item no: 712044
  • EAN: 7320287120448

  • Width: 80 mm
  • Height: 85 mm
  • Depth: 53 mm
  • Volume: 360 cm³
  • Weight: 240 g

Item no 712044 fits:

  • Ingenico iSMP4 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and  look at the pictures before attaching the holder.  
   
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
   
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
   
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.  
   
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: