Log in...

Active holder with cig-plug

With tilt swivel. 12/24V.

With your payment terminal in an active holder, you will always have a fully charged battery. The charging device connects to the payment terminal automatically via pogo pins when you put the device in the holder. Connects to the vehicle’s cigarette lighter socket. 12/24 Volt.

 

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS plastic. Color: black. Made in Sweden. Attach onto a ProClip Mounting Platform or a Pedestal Mount.

 

  • Item no: 712199
  • EAN: 7320287121995

  • Width: 78 mm
  • Height: 89 mm
  • Depth: 74 mm
  • Volume: 514 cm³
  • Weight: 175 g

Item no 712199 fits:

  • myPOS Mini (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: