Log in...

Holder for Cable Attachment

For use with Apple original Lightning to Typ C adapter Cable. With tilt swivel. Padded

The cable attachment holder can be combined with the Apple original Lightning to Typ C Cable that came with your iPhone. You can charge you iPhone by connecting it to the car’s Typ C socket, or use it with a Typ C/cig-plug adapter for the car’s 12V socket.


Note! Cable not included.


The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.


The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.

  • Item no: 714161
  • EAN: 7320287141610

  • Width: 78 mm
  • Height: 97 mm
  • Depth: 50 mm
  • Volume: 378 cm³
  • Weight: 80 g

Item no 714161 fits:

  • Apple iPhone 11 Pro (For all countries)





Please read all of the instructions and look at the pictures before installing.  
1. Place the connector of the cable in the hole in the lower part of the holder. Carefully press the connector downward and forward so it passes the locking and goes into the hole. Press until you hear/feel the connector snap into place in the holder.  
2. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.  
4. The holder is in place.