Log in...

Holder for Cable Attachment

With tilt swivel. For Motorola original cable.

Holder with cable plug attachment. The choice for you who often connect a cable to your radio. The cable is easy to attach to the holder, and then the cable connects to the radio automatically when you put your radio in the holder so you do not have to connect it manually each time. (Cable not included).


The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

  • Item no: 716258
  • EAN: 7320287162585

  • Width: 63 mm
  • Height: 106 mm
  • Depth: 77 mm
  • Volume: 514 cm³
  • Weight: 111 g

Item no 716258 fits:

  • Motorola MXP600 (For all countries)





Please read all of the instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the connector into the cable housing, make sure the cable is in the correct position. Place the lid over the connector. Press the parts together and flip the holder so the backside is upwards. Screw the lid into place. The cable is in place.

2. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

4. The holder is in place.