Log in...

Active holder with cig-plug

With USB-cable with cig-plug adapter. With tilt swivel.

With your payment terminal in an active holder, you will always have a fully charged battery. The charging device connects to the payment terminal automatically when you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket or USB socket, 12/24 Volt.

 

Attach onto a Pedestal Mount or a high strength ProClip mounting platform. AMPS holes. Made of high grade ABS plastic. Color: Black. Made in Sweden.

 

  • Item no: 721144
  • EAN: 7320287211443

Item no 721144 fits:

  • iZettle Reader 2 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward into place in the holder.
To remove the device from the holder: Press the upper part of the holder forward/upward. Pull/flip the upper part of the device our of the holder. Lift the device out from the holder.

4. The holder is in place.

Related Products

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: