Log in...

Active holder with cig-plug

Fits devices with both small and large battery.

Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; the holder also supplies a fully charged battery at all times. Attach onto a ProClip Mounting Platform.

Charging specification:

Charging Specifications:   
Battery Chemistry: Li-ion or Li-Poly batteries   
Input Voltage: 11-30 V   
Charging Voltage: 8.4 V   
Timer for Max. Charging Time: Automatic, stops at 8.4 V   
Max. Charging Time: 2-3 hours depending on battery capacity   
Rapid Charge: 1,0 A +/- 10%   
Trickle Charge: 0 to 50 mA   
LED Charging Indicator: LED Red to Green indicator   
Temperature Control: Controlled by battery   
Operating Temperature: -40 to 50 °C (can be restricted by battery chemistry)   
RoHS Compliant: Yes   
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.   
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

  • Item no: 730025
  • EAN: 7320287300253

Item no 730025 fits:

  • ICOM IP100H (For all countries)
  • ICOM IP501H (For all countries)
INSTALLATION INSTRUCTIONS:

Charging Specifications:  
Battery Chemistry: Li-ion or Li-Poly batteries  
Input Voltage: 11-30 V  
Charging Voltage: 8.4 V  
Timer for Max. Charging Time: Automatic, stops at 8.4 V  
Max. Charging Time: 2-3 hours depending on battery capacity  
Rapid Charge: 1,0 A +/- 10%  
Trickle Charge: 0 to 50 mA  
LED Charging Indicator: LED Red to Green indicator  
Temperature Control: Controlled by battery  
Operating Temperature: -40 to 50 °C (can be restricted by battery chemistry)  
RoHS Compliant: Yes  
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.  
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: