Log in...

Device Mounting Adapter

Complete set with two mounting adapters and two headrest mounts. With tilt swivel. For Nextbase Duo Cinema mount.

Mounting adapter with tilt swivel and a headrest mount. To be used with Nextbase original Duo Cinema mount. The mounting adapter consists of an adapter plate that is to be attached onto the back of the Duo Cinema mount, which then is to be attached onto a tilt swivel mount on the Brodit headrest mount.

 

Tilts 20°, swivels 360°. Made of black ABS/Acetal plastic. Made in Sweden.

 

Please Note that the original Nextbase Dock is not included.

 

Dimensions of one adapter: 90 x 55 x 38 mm (W x H x D mm)   

Weight of one adapter: 83 g   

Dimensions of one headrest mount: 136 x 97 x 81 mm (W x H x D mm)  

Weight of one headrest mount: 225 g

  • Item no: 810696 - Headrest mount
  • EAN: 7320288106960

Item no 810696 fits:

  • Nextbase Duo Cinema (For all countries)
  • Volvo S90 17-18 (For all countries)
  • Volvo S90 17-18 (For all countries)
  • Volvo V90 17-18 (For all countries)
  • Volvo V90 17-18 (For all countries)
  • Volvo XC90 15-18 (For all countries)
  • Volvo XC90 15-18 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before installation. 
1. Remove the original Duo Cinema mount from the Nextbase headrest mount by loosening the six screws. Place the mounting adapter plate onto the back of the Duo Cinema mount and screw it into place with four of the removed screws.
2. Loosen the screw in the center of the mounting adapter so you can remove the attaching plate on the back. Place the attaching plate onto the Brodit headrest mount. Screw the attaching plate into place with the enclosed screws. Place the mounting adapter onto the attaching plate so the tilt swivel fits. Tighten the screw so the mounting adapter is firmly in place, but still can be adjusted/angled. 
3. Use the enlcosed tool to remove the screws in the Brodit headrest mount. Place the back part of the headrest mount onto the front side of the headrest. Place the other part of the headrest, equipped with a mounting plate, onto the back part of the headrest mount so the screws match the holes. Place the screws in the holes. Tighten the screws until the headrest mount is securely in place. The headrest mount is in place.
4. To attach the mounting adapter onto the screen: Place the mounting adapter with the Duo Cinema mount on the back side of the screen ant press it sideways into place.
To attach the screen onto the headrest mount: Place the screen above the mounting adapter on the headrest mount. Press the screen straight downward so it attaches properly onto the mounting adapter.
To remove the screen: Press the screen straight upward, away from the mounting adapter.

Related Products