Log in...

Headrest mount

Note! Two-part solution.

 

Model specific two-part solution

Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

 

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

 

Dimensions: 210 x 105 x 74 mm (W x H x D mm)  

Weight: 130 g

  • Item no: 811050 - Headrest mount
  • EAN: 7320288110509

Item no 811050 fits:

  • Volvo C70 97-05 (England)
  • Volvo C70 97-05 (For all countries)
  • Volvo S60 00-15 (For all countries)
  • Volvo S60 00-15 (For all countries)
  • Volvo S70 99-00 (For all countries)
  • Volvo S70 99-00 (For all countries)
  • Volvo S80 99-16 (For all countries)
  • Volvo S80 99-16 (For all countries)
  • Volvo V60 11-18 (For all countries)
  • Volvo V60 11-18 (For all countries)
  • Volvo V70 99-00 (For all countries)
  • Volvo V70 99-00 (For all countries)
  • Volvo V70 II 08-16 (For all countries)
  • Volvo V70 II 08-16 (For all countries)
  • Volvo V70 N 00-08 (For all countries)
  • Volvo V70 N 00-08 (For all countries)
  • Volvo XC60 09-17 (For all countries)
  • Volvo XC60 09-17 (For all countries)
  • Volvo XC70 00-16 (For all countries)
  • Volvo XC70 00-16 (For all countries)
  • Volvo XC90 02-14 (For all countries)
  • Volvo XC90 02-14 (For Europe)
  • Volvo XC90 09-12 (For USA)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the headrest mount.

1. The headrest mount parts are to be installed the way that is shown the picture.

2. Place the back part of the headrest mount onto the front side of the headrest. Press it toward you, into the gap between the seat's headrest and back support.

3. Place the mounting plate onto the back part of the headrest mount so the screws match the holes. Tighten the two screws using the enclosed tool so the headrest mount is firmly in place.

4. The headrest mount is in place.

Related Products