Log in...

Active holder with cig-plug

With tilt swivel. 2A charger.

The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

 

Charging specifications:

Input voltage: DC/10-30V

Charging voltage: DC/4.75-5.3V

Output current(Typ): 2.0A

Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection

LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)

Operating temperature: 0°C ~ +40°C

Storage temperature: -20°C ~ +80°C

RoHS compliant: ROHS

  • Item no: 968800
  • EAN: 7320289688007



Product sheets: 234342.pdf

Item no 968800 fits:

  • Intermec CN3 (For all countries)
  • Intermec CN3e (For all countries)
  • Intermec CN4 (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Attention! Read all instructions before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.

3. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.

Related Products

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: