Log in...

Passive holder with tilt swivel

Padded.

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the holder. The iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

 

The holder is padded. This means it has a plush coating which protects your device from scrathing. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for bare iPhone without skin/case.

 

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.

  • Item no: 711164
  • EAN: 7320287111644

  • Width: 83 mm
  • Height: 82 mm
  • Depth: 50 mm
  • Volume: 340 cm³
  • Weight: 74 g

Item no 711164 fits:

  • Apple iPhone 11 Pro Max (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and  look at the pictures before attaching the holder.  
   
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
   
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
   
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.  
   
4. The holder is in place

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: