Log in...


Keep your device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.


The ProClip is car specific, it is customized for each  car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!


The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.


- Do you want to be able to switch between several holders on the same ProClip? Please see Brodit’s MultiMoveClip.

- Are you installing larger devices or heavier equipment? Please see Brodit’s Extra Strength Mounting Platforms and Pedestal Mounts

  • Item no: 855597 - Angled mount
  • EAN: 7320288555973

Item no 855597 fits:

  • Audi A4 Allroad 20 (For all countries)
  • Audi A4 Avant 20 (For all countries)
  • Audi A4 Sedan 20 (For all countries)
  • Audi A5 20 (For all countries)
  • Audi S5 20 (For all countries)





Please read all of the instructions and look at the pictures before attaching the ProClip.  
1. Press the thin end of the enclosed gap opener into the gap between the air vent and the panel, to widen the gap, placed directly to the left of the air vent control. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape covers on the ProClip. Press the angled edge on the lower part of the ProClip into the gap next to the gap opener.  
2. Pull out the gap opener. Slide the ProClip rightwards until it stops, placed directly to the left of the air vent control.  
3. Press down on the upper part of the ProClip so it flexes. Press the upper part of the ProClip forward so the edge with adhesive tape is placed under the frame surrounding the air vent. Carefully release the pressure so the upper edge is pressed upward toward the frame surrounding the air vent. Press upward on the upper part of the ProClip so the adhesive tape attaches properly.  
4. The ProClip is in place.

Attach a holder onto your ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct holder for your device here: