Active holder with cig-plug

With tilt swivel. For devices with a TMC module.

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module. (TMC module not included).  
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Item no 215270

EAN: 7320282152703

Item no 215270 fits:

  • Navman F20 (For all countries)
  • Navman ICN 530 (For all countries)
  • Navman ICN 720 (For all countries)
  • Navman N20 (For all countries)
  • Navman N40i (For all countries)
  • Navman N60i (For all countries)





Please read all of the instructions and look at the pictures before attaching the mount. The mount can be used with devices both with and without a TMC device.  
1. For devices without TMC: Loosen the screw in the original mount and pull the mount apart so you get three parts. Place the 215270- mount in the desired position and attach it with the enclosed screws. Place the locking ring onto the 215270-mount. NOTE: It is important to put the ring the right way onto the mount (as shown in picture).  
2. Press the original mount onto the 215270-mount. Lock the original mount onto the 215270-mount by tightening the locking ring. Attach the charging cable.  
3. For devices with TMC: The same installation procedure applies as for devices without TMC.  
4. The mount is in place, with device in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: