With MultiMoveClip quick release dock for OtterBox uniVERSE tablet cases. With tilt swivel.

Keep your tablet installed while driving and you will always have it within easy sight and reach! With quick release MultiMoveClip dock for use with any Otterbox uniVERSE tablet case. Simply slide your tablet into place with a one-hand grip. For easy attachment with a perfect, firm fit. Neat, discreet and convenient.
The mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or witch easily between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal mount.

Item no 241636

EAN: 7320282416362






Please read all of the instructions and look at the pictures before attaching the product.
1. To install the MultiMoveClip: Loosen the screw in the center of the MultiMoveClip so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the MultiMoveClip over the attaching plate so the screw fits in the hole in the center. Tighten the screw until the MultiMoveClip is firmly in place, but still can be adjusted.   
2. Install the plate in your uniVERSE case: Remove the center plug from your OtterBox uniVERSE case. Place the 4-Prong receiver in its place on the inner side. On the outer back side: Place the block over the 4-Prong receiver and attach it with the enclosed screws.
3. To attach the Tablet: Slide the block downward into the MultiMoveClip until it clicks into place. Quick release dock in place with a uniVERSE case.
To remove the tablet: Press the release tab and slide the tablet upward out of the MultiMoveClip.
4. Product in place.