Active holder with cig-plug

With tilt swivel. Fits devices with standard and extended battery.

The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.  
Charging specifications:  
Input voltage: DC/10-24V  
Charging voltage: DC/4.6-5.3V  
Output current(Typ): 3.0A  
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection  
LED charging indicator: Product output indicator  
Operating temperature: 0°C ~ +40°C  
Storage temperature: -20°C ~ +80°C  
RoHS compliant: ROHS

Item no 512013

EAN: 7320285120136

Item no 512013 fits:

  • Motorola MC55 (For all countries)
  • Motorola MC65 (For all countries)
  • Motorola MC67 (For all countries)
  • Symbol MC55 (For all countries)
  • Symbol MC65 (For all countries)
  • Symbol MC67 (For all countries)
  • Zebra MC55 (For all countries)
  • Zebra MC65 (For all countries)
  • Zebra MC67 (For all countries)





Please read all of the instructions and look at the pictures before attaching the holder.  
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.  
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: