Active holder with cig-plug

With tilt swivel. Slim design with charger integrated in the holder.

The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. The holder fits devices both with standard and extended battery. Attach onto ProClip Mounting Platform.

Item no 530013

EAN: 7320285300132

Item no 530013 fits:

  • Motorola MC55 (For all countries)
  • Motorola MC65 (For all countries)
  • Motorola MC67 (For all countries)
  • Symbol MC55 (For all countries)
  • Symbol MC65 (For all countries)
  • Symbol MC67 (For all countries)
  • Zebra MC55 (For all countries)
  • Zebra MC65 (For all countries)
  • Zebra MC67 (For all countries)





Please read all of the instructions and look at the pictures before attaching the holder.  
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.  
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.  
4. The holder is in place.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: