Active holder with cig-plug

Slim design with charger integrated in the holder. With Tilt Swivel. For use with Li-Ion or Li-Poly batteries.

Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; the holder also supplies a fully charged battery at all times. The active holder has a unique slim design with the charging box integrated in the holder. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Item no 530018

EAN: 7320285300187

Item no 530018 fits:

  • Sepura STP 8000 (For all countries)
  • Sepura STP 8038 (For all countries)
  • Sepura STP 9000 (For all countries)





Please read all of the instructions and look at the pictures before attaching the holder.  
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.  
2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.  
3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.  
4. The holder is in place.  
Charging Specifications  
Battery Chemistry. Li-ion and Li-Poly batteries  
Input Voltage. 11-30 V  
Charging Voltage. 9.5 V  
Timer for Max. Charging Time: Automatic, stops at 9.5 V  
Max. Charging Time: 2-3 hours depending on battery capacity  
Rapid Charge: 1,2 A +/- 5%  
Trickle Charge: 0 to 50 mA  
LED Charging Indicator: LED Red to Green indicator  
Temperature Control: Controlled by battery and charger  
Operating Temperature: -40° C to + 50° C / -40° F to 122° F

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: