530388

Active holder with cig-plug

Slim design with charger integrated in the holder. For use with Li-Ion or Li-Poly batteries.

Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; the holder also supplies a fully charged battery at all times.  
 
The active holder has a unique slim design with the charging box integrated in the holder and LED indicator to show that charging is in progress, the indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.

Item no 530388

EAN: 7320285303881



Item no 530388 fits:

  • HYT TC-500 Series (For all countries)
INSTALLATION INSTRUCTIONS:

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the holder. 1. Fasten the holder on the attaching plate with the enclosed screws. 2. Place the bottom part of the device into the holder. Press the top of the device forward and slide the device downward into place in the holder. 3. To remove the device from the holder: Press the device upward out of the holder. 4. The holder is in place.  
Charging Specifications:  
Battery Chemistry: Li-ion or Li-Poly batteries  
Input Voltage: 11-30 V  
Charging Voltage: 8.4 V  
Timer for Max. Charging Time: Automatic, stops at 8.4 V  
Max. Charging Time: 2-3 hours depending on battery capacity  
Rapid Charge: 1,6 A +/- 5%  
Trickle Charge: 0 to 50 mA  
LED Charging Indicator: LED Red to Green indicator  
Temperature Control: Controlled by battery  
Operating Temperature: -40 to 50 °C (can be restricted by battery chemistry)  
RoHS Compliant: Yes  
Input Transient Protected: Withstands +150V & -450V. A 2,5A fuse is mounted on the incoming supply.  
Output Short Circuit Protected: The charger will supply a maximum current of 1,6 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Attach your holder onto a ProClip!

You need two parts; a ProClip for your car, and a holder for your device. Find the correct ProClip for your vehicle here: